Impala Lightspeed Inline Back Brake Kit (1)

Impala Inline Brake Kit. 

Not compatible with other brands.

Sold individually.

Includes one brake kit housing and pad.

This brake kit will fit on Impala Lightspeed inline skates only.

Brand: Impala

How Do I Install The Inline Skate Brake?

• 1. Decide which foot you prefer to brake with, usually this will be your stronger leg which for most people is the right leg
• 2. Use the 2 skate tools or 2 allen wrenches to remove the rear nut and axle from the chassis
• 3. Grab the brake and position it so the holes line up to the chassis where you just removed the axle from. Make sure the upper groove catches the latch inside the chassis. The brake should not move up and down if properly connected
• 4. Remove longer axle and bolt 
• 5. Place longer axle through the holes in the brake and through the chassis, securing brake and rear wheel in place
• 6. Tighten brake and wheel assembly to chassis using the skate tool/allen wrench. Screw until tight
• 7. Ensure brake is secured tightly before use. There should be no movement in the brake at all. Done!
  
• Watch a Video demo here